home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Almathera Ten Pack 3: CDPD 3
/
Almathera Ten on Ten - Disc 3: CDPD3.iso
/
scope
/
101-125
/
scopedisk116
/
prowriter
/
readme
< prev
next >
Wrap
Text File
|
1995-03-19
|
2KB
|
45 lines
CItoh 8510A ProWriter - 1.3 Printer Driver (v1.0)
-------------------------------------------------
This is the first released version of this printer driver. It is a 1.3
compatible driver compiled with Lattice 3.02 borrowed from Donnie
Mickish (Thanks). (Manx has troubles with AllocMem(), I really wanted
dynamic allocation, my old Lattice 3.03 was useless, and I couldn't
find anyone willing to loan me a modern version of Lattice :^) I also
want to say thanks to Jonathan Krueger for several ideas from his
ProWriter Driver.
The source is not provided, but was written to follow as closely as
possible to the 1.3 driver examples in the 1.3 developer's update just
in case Commodore decided to support the ProWriter (It's for free guys:^)
I made an honest effort to support every reasonable feature that the 8510
could support with the exception of horizontal tabs, which are preset at
every 8 characters. I don't know of anyone who uses these. If you really
need them, send me a note & I'll consider it.
BTW, this one does support the setting of left margins. (You guys are
looking at the wrong manual. There is a typo in the manual with the
quick reference sheet).
Supported graphic densities:
dens. 1 2 3 4 5 6
x - 80, 96, 136, 160, 136, 160
y - 72, 72, 72, 72, 144, 144
Bugs: None, according to my volunteer examiners :^)
Send mail to:
Kent Polk - Southwest Research Institute
Internet: kent@swrinde.nde.swri.edu
UUCP : $ {cs.utexas.edu, gatech!petro, sun!texsun}!swrinde!kent
----------------------------------------------------------------------
Disclaimer:
My employer had nothing to do with this development other than for net
access, so don't go crying to them for support.
----------------------------------------------------------------------